Copyright © 2019 ZhangJiaGang JST Machinery Co.,Ltd.All rights reserved. Site Map Designed byiwonder.cn
Tel: +86-135 8442 1186
Email: admin@jstmachinery.com
This is 16-12-6 rinsing filling capping machine for water . Filling speed for 500ml : maximum can be 4000 bottles per hour . Suitable bottle size ；200ml-2000ml
Bottle lowing machine → CGF 16-12-6 rinsing filling capping machine → PVC sleeve labeling machine → date printer →PE film shrink packing machine
Model | CGF8-8-3 | CGF16-12-6 | CGF18-18-6 | CGF24-24-8 | CGF32-32-10 |
Capacity(500ml)(b/h) | 0-2000 | 0-4000 | 0-6000 | 0-10000 | 0-14000 |
Filling precision | ≤±5MM | ≤±5MM | ≤±5MM | ≤±5MM | ≤±5MM |
Water pressure | 0.18 | 0.18 | 0.18 | 0.18 | 0.18 |
Gas pressure | 0.6(Mpa) | 0.6(Mpa) | 0.6 | 0.6 | 0.6 |
Weight | 2000 | 2500 | 3000 | 4000 | 5000 |
Size (mm) | 2200×1600×1900 | 2400x1650x2050 | 2800×1800×2200 | 3000×2180×2200 | 3600×2800×3150 |
The outset of rinsing can be adjusted by adjusting the angles of water distribution valve
All is made up of stainless steel 304 .
Under the machine ,there will be SS304 pipes to connect the waste water to water collecting tank.
Filling speed for 500ml : maximum can be 4000 bottles per hour .
Suitable bottle size ；200ml-2000ml
Power :4.75kw
If the liquid level in bottle is not proper, the position of filling must be adjusted by adding or decreasing the adjusting gasket to high or low the position respectively.
All the motor ,they are ABB type ,high quality ,even the motor on the air fan .
And under the machine ,the speed reducer and the motor ,they are combined ,without belt connect.
(ABB motor )
Touch screen photos:(Siemens )
6 heads capping machine :
Screw capping machine is most precision part in the 3-1 machine,it has a big influence to the goods stability and defective rate. our screw capping has following feature.
It has cap clelaning tunnel and cap elevator together.(The cap elevator ,it is lift sending type ,not air sending type )
Now our new design for three in one machine is like the followings :
First ,we will pack the machines with wrapping machine ,please check the following photos :
Then we will pack the machines by using standard export wooden cases :
And then we will load all the machines to the container :
Usually our clients will go to pick up our engineers ,please check the following photos for our bhutan client and our engineer :
And the following photos ,it is our engineer installing and testing the machines for our clients in their factory
Usually before placing the order ,our client will come to visit us ,and discuss the details ,please check the following photos :
