Copyright © 2019 ZhangJiaGang JST Machinery Co.,Ltd.All rights reserved. Site Map Designed byiwonder.cn
Tel: +86-135 8442 1186
Email: admin@jstmachinery.com
This is our two in one machine ,it is used for canned juice ,it is 12-4 filling sealing 2 in 1 ,we also have any other type ,such as 18-6,32-10 and so on.Filling speed is also different . This filling sealing machine ,it can be used for aluminum cans ,tinplate cans ,plastic cans and so on
1.Model:12-4J
Filling speed :0-5000bph @ 250ml.
Suitable bottle size : 150ml-1000ml.
This is 2 in machine ,it is used to fill juice ,the cans ,it can be tinplate can ,aluminum can ,or plastic cans .
Now in Nigeria ,we have one client ,who use plastic PE cans to fill juice .
The following is his machine photos :
The Juice beverage filling machine is mainly used for hot filling machine and sealing of green tea, black tea, and fruit juice drink.It can be used to fill pure water or mineral water or still water ,just need to lean the juice filling macine nozzle and pipes .
Adopt PLC as center controller, make use of pressure transmitter and electromagnetism pneumatic valve to measure liquid level, and keep balance of filling pressure to insure stable liquid level.
Adopt new type filling valves from jst mchinery which are especially designed for plastic bottles. The returned air and the liquid in filling tank are insulated to insure cleanliness of the filled beverages.4. Adopt advanced magnet clutches for capping with adjustable tensional moment to insure capping safely and reliably.
1.Different can size ,we will make exchanged spare parts for you .Please check the following green sparep arts photo:
2.For canned juice filling line ,will you need to fill juice in room temperature or hot filling temperature ?
Machine bottom detailed photo and Siemens touch screen photo:
Before filling ,you need the water treatment system and jucie mixing system ,please check the following photos:
If you need hot filling ,after filling ,you still need bottle tumbling conveyor belt ,bottle cooling tunnel.
Bottle cooling tunnel photo:
Usually we will pack the machines by using wrapping film first ：
Then we will pack them by using standard export wooden cases ：
At last ,we will load them into container :
Usually client will go to their local airport to pick our engineer up
And then engineer will assemble the machines first
At last, engineer will test each machine
Sometimes, client will come to discuss the detail with us :
