Copyright © 2019 ZhangJiaGang JST Machinery Co.,Ltd.All rights reserved. Site Map Designed byiwonder.cn
Tel: +86-135 8442 1186
Email: admin@jstmachinery.com
This is our two in one machine ,it is used for canned juice ,it is 12-4 filling sealing 2 in 1 ,we also have any other type ,such as 18-4,24-4,36-6, 48-8 and so on.Filling speed is also different . This filling sealing machine ,it can be used for aluminum cans ,tinplate cans ,plastic cans and so on
It adopts open –gear transmission and main motor is ABB, the filler valve is out borne mechanical valve, CO2 rising with lifting device, capping with secondary seaming.
Empty can transport into filling machine through inlet screw and inlet starwheel by conveyor, position by can hold table. Lifting device make cans and filling valves pressed. Just get pressed valves can open and filling.
After filling, cans transport to capper by can transport device. After two times’ seaming, cans transport into filled can conveyor by outlet starwheel.
Main transmission device as main driving force to drive along capper .In the condition of gears mutually meshing, gimbal and in-phase belt transmission, main driving force transmitted to inlet screw , inlet starwheel according，middle transition starwheel, cap transmission device and outlet starwheel and ect. In order to achieve synchronized operation.
Filling heads : 12
Seamer heads :4
Filling speed : 0-6000 cans per hour .
Filling pressure : 0.25-0.3Mpa
Machine size : 3000mm*2050mm*2200mm
Weight : 4500kgs
Empty can inlet——2. CO2 Cleaning according to circuit Pre-aerated——3. Start to Filling ——4.Finish filling ——5. Exhaust——6. Filled can outlet
For carbonated canned drink ,you still need water treatment system ,mixing system , labeling system (it is necessary for plastic cans ,packing system )
Carbonated drink mixing system photos:
Labeling and packing system photo :
Usually we will pack the machines by using wrapping film first ,
Then we will pack the machines with standard export wooden cases ,and then load them into the container :
First ,client need to make the customs clearance ,then take the machines to his factory
And then engineer will go to assemble all the machines in turn .
And then ,engineer will test each machine
Sometimes, client will come to discuss the detail with us ,sometimes client will come to inspect the machines before delivery :
